FAQ

Frequently asked questions (FAQ) about NEON-2000-JNX

General

  • NEON-2000-JNX Model and Sensor Specifications

Model Name Image Sensor Specification Image Sensor Module
NEON-201B-JNX 1/ 3”, 1.2M, Global Shutter , 1280x 960, 54fps, COLOR Basler, DAA1280-54UC-CS
NEON-202B-JNX 1/1.8”, 1.9M, Global Shutter , 1600x1200, 60fps, COLOR Basler, DAA1600-60UC-CS
NEON-203B-JNX 1/3.7”, 2 M, Rolling Shutter, 1920x1080, 30fps, COLOR Basler, DAA1920-30UC-CS
NEON-204B-JNX 1/2.5”, 5 M, Rolling Shutter, 2592x1944, 14fps, COLOR Basler, DAA2500-14UC-CS
NEON-201B-JNX 1/ 3”, 1.2M, Global Shutter , 1280x 960, 54fps, COLOR Basler, DAA1280-54UC-CS
NEON-202B-JNX 1/1.8”, 1.9M, Global Shutter , 1600x1200, 60fps, COLOR Basler, DAA1600-60UC-CS
NEON-203B-JNX 1/3.7”, 2 M, Rolling Shutter, 1920x1080, 30fps, COLOR Basler, DAA1920-30UC-CS
NEON-204B-JNX 1/2.5”, 5 M, Rolling Shutter, 2592x1944, 14fps, COLOR Basler, DAA2500-14UC-CS
NEON-201A-JNX 1/2.6”, 2 M, Global Shutter , 1920x1080, 60fps, COLOR Appropho, On Semi AR0234
NEON-202A-JNX 1/1.8”, 8 M, Rolling Shutter, 3840x2160, 30fps, COLOR Appropho, Sony IMX334

  • Hardware Specification

Neon-iSeries Digital Input Digital Output UART Dimensions Weight
Neon-Series 4x DI, includes 1x sensor trigger 4x DO, includes 1x strobe out TXD, RXD, GND 123.3 x 66.81 x 77.5 mm 700g

  • Software environment

Neon-Series JetPack L4T Ubuntu CUDA cuDNN TensorRT Python2 Python3 Pylon
Version 4.2.1 32.2 18.04.2LTS 10.0 7.5.0.56 5.1.6.1 2.7.15 3.6.9 5.0.9
Version 4.3 32.3.1 18.04.2LTS 10.0.326 7.6.3.28 6.0.1.10 2.7.17 3.6.9 5.2.0
Version 4.4 32.4.3 18.04.2LTS 10.2 8.0.0.180 7.1.3.0 2.7.17 3.6.9 5.2.0
Version 4.6.1 32.7.1 18.04.2LTS 10.2 8.2.1 8.2.1 2.7.17 3.6.9 5.2.0

  • Version check

    • Jetpack version
      sudo apt-cache show nvidia-jetpack
    • L4Tversion
      head -n1 /etc/nv_tegra_release
    • TensorRT
      dpkg -l|grep nvinfer
    • CUDA
      nvcc --version
    • cuDNN
      dpkg -l|grep cudnn
    • Python
      python --version

  • Trigger in and Strobe out

NEON-201B-JNX NEON-202B-JNX NEON-203B-JNX NEON-204B-JNX NEON-201A-JNX NEON-202A-JNX
Support V V V V V -

Trigger in and Strobe out

How to set the NEON camera to trigger mode.

  • NEON-20xA
    • Enable the trigger mode.
    v4l2-ctl --set-ctrl=trigger_mode=1

    v4l2-ctl --set-ctrl=low_latency_mode=1
  • NEON-20xB
    • Open Pylon viewer.
    • “Acquisiton Controls” > “Trigger Mode”-> “On”
    • “Acquisiton Controls” > “Trigger Source”-> “Line1”

How to wire.

DI/O schematic diagram