This tutorial will guide you how to getting start EasyFind by Euresys
Following this tutorial, you will learn how to use EasyGauge to measure the rotation angle of a CCD sensor package. As we only need to retrieve an angle value, it’s not required to work in a calibrated field of view. All geometrical parameters and results will be express as numbers of pixels.
Following this tutorial, you will learn how to use EasyGauge to perform measurements on a distorted rectangle component..
Load the calibration image
Calibrate the field of view
Load the distorted image
Attach a rectangle gauge to the image
Perform the inspection
Following this tutorial, you will learn how to use EasyGauge to perform lead frames inspection. This operation determines the dimension, position, curvature, size, angle or diameter of the lead frames with an excellent accuracy. Robustness is ensured by powerful edge-point selection mechanisms that are intuitive and easy to tune, allowing measurement in cluttered images.
Load the calibration image
Calibrate the field of view
Loading a lead frame image
Setting a coordinate system
Attaching a point gauge to the frame shape
Attaching other point gauges to the frame shape
Loading another lead frame image
Tuning the coordinate system
Performing the inspection
Following this tutorial, you will learn how to use EasyGauge to perform grid calibration, and unwarp a distorted image.
Load the calibration image
Calibrate the field of view
Load the distorted image
Unwarp the distorted image